Year-End Inventory Count for Wineries: Bulk, Barrel and Cased Goods

October 29, 2026
Year-End Inventory Count for Wineries

Every December we get a version of the same call. Harvest is barely in the rearview mirror, the holiday club shipment just went out, and someone realizes the year-end inventory count is a couple of weeks away, and nobody has a plan for it yet.

It’s an easy job to put off, because the cellar never really stops moving. But the count you take at the close of the year drives your cost of goods, your tax return, and, for a lot of wineries, your federal report to TTB. Getting it right on the day is far easier than rebuilding it in February.

We’ve written before about how to track wine inventory all year long. This post is about the year-end inventory count for wineries itself: what to count, how to write it down, and what to do with the numbers once you have them. The first question is why one day’s count carries so much weight.

Why the Year-End Count Matters for Your Taxes and Your Books

Your year-end count sets your ending inventory, and your ending inventory decides how much of the year’s production cost lands in cost of goods sold. Count too little wine and your cost of goods goes up while your profit goes down. Count too much, and you’ll show profit you don’t actually have, and you’ll pay tax on it.

The IRS doesn’t leave this to your software. IRS Publication 538 says, “you must take a physical inventory at reasonable intervals, and the book amount for inventory must be adjusted to agree with the actual inventory.” In other words, the cellar wins. If your books say 4,200 gallons and the tanks say 4,050, the books get corrected.

The same publication says inventory valued at cost has to include “all direct and indirect costs associated with it.” That’s why a count by itself isn’t enough. Each gallon and each case needs to carry the right cost per vintage and lot, which is where your bookkeeping and your cellar records finally meet.

A small winery may qualify for a simpler inventory method under the small business exception, but the IRS still expects a method that clearly reflects income. Either way, knowing what’s actually in the building is the starting point. That leads to a date question a lot of owners haven’t thought about.

Is December 31 Also Your TTB Inventory Date?

It depends on how often you file your Report of Wine Premises Operations. TTB requires a physical inventory of untax paid wine in bond once a year, but the date isn’t the same for every winery.

Under 27 CFR 24.313, wineries that file the report annually “shall take the physical inventory at the close of the calendar year.” Monthly and quarterly filers start from a different default: the regulation describes an annual period beginning July 1 and ending June 30, and lets you pick a different one by sending TTB a notice. Quarterly filers have to choose a period that starts on the first day of a calendar quarter.

So a small winery filing annually counts once, at year-end, and it serves both the books and TTB. A larger winery filing monthly may be on a June 30 TTB cycle and still need a December 31 count for its calendar-year tax return. We’d rather you find that out in October than in January. Once the date is settled, the work starts with the bulk wine in your cellar.

How to Count Bulk Wine in Tanks and Barrels

Bulk wine gets counted container by container, measured in gallons, and grouped by tax class. The TTB rule is practical about it: “Tanks containing wine will be listed by tank number,” and barrels holding the same kind of wine “may be summarized,” for example ten barrels of red table wine at 500 gallons.

For tanks, measure the actual level and convert it with your tank’s calibration chart rather than copying the number from the last work order. For barrels, a full barrel is usually close to its rated volume, but topping schedules slip in December, so note any barrels that are short. Keep each lot and vintage on its own line, since that’s how you’ll assign cost later.

A few habits make the day go smoothly:

  • Freeze cellar moves for the count, or at least log every transfer with a time stamp.
  • Count in pairs, one person measuring and one recording.
  • Write down the tax class next to each line so the totals sort themselves.
  • Note wine that’s still fermenting or sitting on lees, and how you measured it.

When the bulk count is done, the bottles are next, and they follow stricter rules than you’d expect.

Counting Cased Goods, Library Wine and Samples

Bottled wine is counted in cases and loose bottles, converted to gallons, and kept separate from bulk. The regulation allows “the total volume of one kind of wine in cases, bottles and similar containers” to be entered as one item, so you don’t need to list every pallet.

Library wine still in bond belongs in the count, even if it’s not for sale this year. Wine you’ve already moved out of bond and paid tax on, such as stock sitting in a taxpaid tasting room, is a different bucket. It belongs in your book inventory, but it isn’t part of the bonded inventory you report to TTB, so count it on its own sheet.

Samples are where small gaps start. Bottles pulled for trade tastings, events or the winemaker’s bench need to be recorded when they leave, not remembered in December. The reason is in 27 CFR 24.266: bottled wine isn’t expected to lose volume the way bulk does, and TTB says you “shall pay the tax on any unexplained loss of untaxpaid bottled or packed wine.” An unrecorded case of samples can turn into a tax bill.

Don’t forget dry goods either. Glass, corks, capsules, and labels on hand are inventory on your books until they’re used. With everything counted, it’s time to make the numbers agree.

How Do You Reconcile the Count to Your TTB Report?

You reconcile by totaling the count by tax class, separately for bulk and bottled, and checking it against what your records say should be on hand. TTB’s rule says those totals are reported “in wine gallons or in liters, by tax class” on the Form 5120.17.

The inventory record also has paperwork rules of its own. Pages are numbered, and the last page is dated and signed under a penalties of perjury statement. The record is kept on file with the 5120.17 for the period when the count was taken.

For annual filers, TTB’s reminder on the Report of Wine Premises Operations says the annual report is due January 15 of the following year. That leaves about two weeks between the count and the deadline, which is tight if the count raises questions.

If your excise filings are on your mind too, our post on TTB excise taxes for wineries covers that side.

The goal is one set of numbers. Your TTB report, your book inventory and your cost of goods should all start from the same count. When they don’t, the next question is what to do about it.

What Should You Do When the Count Does Not Match?

Start by finding out whether the gap is in bulk or in bottles, because TTB treats them very differently. Bulk wine loses volume naturally, and TTB’s inventory loss rule says the physical count “will determine losses due to spillage, leakage, soakage, evaporation, and other losses normally occurring from racking and filtering.”

There’s a limit, though. Under 27 CFR 24.266, a claim for the loss is required when bulk losses for the year exceed 3% of the wine on hand at the start of the period plus wine received in bond, figured separately for each tax class, with separate tests for some production losses.

Say you started your annual period with 10,000 gallons in bond and received another 2,000 gallons in bond from another winery. At 3%, the allowance on 12,000 gallons is 360 gallons. A 250-gallon gap from evaporation and racking is normal cellar life. A 500-gallon gap means you’ll want to find out why and file a claim.

Bottled gaps are a different story. A missing case usually means a removal nobody recorded, so check tasting room transfers, samples, breakage logs, and club shipments before you close the books. The more of that you can trace, the less you’ll end up treating as an unexplained loss.

A Simple Year-End Count Checklist for Wineries

A good count is mostly planning. This is the list we walk clients through:

  • Confirm your TTB inventory date and your tax year-end, and whether they match.
  • Pick a count day and a cutoff time, and tell the cellar and tasting room teams.
  • Print count sheets by tank, barrel group, and warehouse location.
  • Decide who counts wine held at a custom crush partner or off-site storage, and get their count in writing.
  • Record every sample, breakage, and transfer before the count, not after.
  • Count bulk and bottled separately, by tax class.
  • Count dry goods and packaging.
  • Reconcile to your records, investigate gaps, and sign the inventory record.
  • Update your books and cost per gallon by lot before you close the year.

None of it is complicated on its own. The hard part is doing it all in the same week as holiday sales, which is why it helps to have a second set of eyes.

Get Help Closing Your Year

A clean count makes January easier, from the 5120.17 to your tax return to the cost of goods numbers you’ll price next year’s releases on. As the winery accountants behind operators across Napa and beyond, we help wineries plan the count, reconcile it, and carry it into their books. Our winery bookkeeping team can handle the reconciliation and cost updates for you.

If you liked this one, you’ll probably also like our guide to winery cost of goods sold.

If you want help planning this year’s count, reach out to us and we’ll walk through it with you.

Octavio

Smart winery accounting that protects your margins

Is it time to set your winery up with an accounting system that actually works? Get in touch with us today and we’ll get back to you within 24 hours. 

Do you want to join our once-a-month newsletter?(Required)

"*" indicates required fields